3M™ Hydrogen Fluoride Cartridge/Filter, 7093CB, P100, pair

3M™ Hydrogen Fluoride Cartridge/Filter 7093CB (bulk case) is NIOSH approved and provides protection against hydrogen fluoride and oil/non-oil based particles. It provides Nuisance Level Organic vapour (OV) and Acid Gas (AG) Relief* when used with 3M™ Half and Full Facepiece Respirators 6000, 7000 and FF-400 Series with bayonet filter holders.When properly fitted, the 3M Hydrogen Fluoride Cartridge/Filter 7093CB can be used in a variety of applications including welding, brazing torch cutting, metal pouring, soldering and exposure to lead, asbestos, cadmium, arsenic, MDA and HF for concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with full facepieces. This filter also provides nuisance level* protection against OV and AG exposures. Full facepieces must be quantitatively fit tested to claim assigned protection factor above 10 in negative pressure mode. Do not use in environments that are Immediately Dangerous to Life or Health (IDLH). NIOSH approved for hydrogen fluoride and certain oil and non-oil based particles. 3M recommended for relief against nuisance levels* of organic vapour/acid gases. Commonly used in the Abatement market, the filter is encapsulated in a hard shell to help protect it from the decontaminating water spray showers.

MFR 7000126938

Recommended Application

• Grinding
• Chemical Processing
• Pouring/Casting
• Finishing Operations
• Asbestos
• Handling
• Metal Pouring Including Exposure to Lead
• Wood Processing
• Welding
• Assembly & Mechanical
• Soldering
• Cadmium
• Manufacturing
• Brazing
• Spray Coating
• Clean-up
• Chemical Clean-up
• Torch Cutting
• Remediation
• Batch-charging
• MDA
• Chemical Transfer
• Painting
• Arsenic
• Maintenance
• Primary Metal
• Sanding

Features

• 3M recommended for relief against nuisance levels of organic vapor and acid gases (concentrations not exceeding OSHA PEL or applicable government occupational exposure limits, whichever is lower)
• SWEPT BACK DESIGN allows an enhanced field of view and increased comfort
• VARIETY OF USES: When properly fitted, use in a variety of applications including welding, brazing torch cutting, metal pouring, soldering
• LIGHTWEIGHT, LOW PROFILE design combines P100 filtration with carbon-loaded features found in heavier combination cartridge products
• USE WITH 3M Half and Full Face Pieces 6000, 7000 and FF-400 Series with a bayonet-style filter/cartridge connection or 3M Scott AV-3000 HT and AV-3000 SureSeal facepieces with 3M Scott AV-632 Bayonet Adapter
• SIMPLE SEAL CHECK: Unique, spring-loaded filter cover design simplifies negative pressure user seal checks